The daily maintenance of “Lanling“ embroidery machine mechanical and electronic control

"Lanling" remind you that before the daily maintenance of electronic, must cut off power supply first, out the power plug from the socket, ensure safety.

1. Clean the dust in embroidery machine regularly, to ensure that sewing equipment is always running in the best state. Clean up the dust should be used to clean compressed air and soft brush.

2. Regular check case on the electric fan is operating normally, ventilation is obstructed.

3. Rregular cleaning case, avoid all kinds of oil casing or into the chassis.

4. Regularly check the earth up the device (usually outside) are in good condition, ground terminal is loose or poor contact due to corrosion. Whether chassis grounding NaZhu row of each wire connection is good.

5. Regularly check whether the power supply the power cord is in good condition, fixed and connected to the main terminal line of the firm.

6. Regularly check the electrical connection in the peripheral electrical institutions are in good condition, the connection point and connecting cable insulation protection are in good condition, without damage.

7. Temporarily stop the use of computer embroidery machine, electricity regularly (2 ~ 3 days electricity a advisable), electricity lasts more than 1 hour at a time.

8. If computer embroidery machine unused for a long time, once again enabled, the need to please the professional technical personnel to do a good job of check before machine electricity.

(1)Clean up the dust control box, control obviously in the damp, you must use hot air drying.

(2)Check the terminal voltage is correct? All kinds of electrical connection is reliable?

(3)Check whether all types of cable insulation is good? Presence of skin damage?

(4)Check whether the chassis grounding line is strong?